- Regular price £12.99
- 3 X 4MM Cleat Mounting Bolts
- 3 X Cleat Washers
- 4MM Hex Key
The WELLGO 98A cleat set is compatible with all standard SPD shoes and SHIMANO mountain SPD pedals.
Before using this or any pedal system, be sure that all of the shoe cleat fittings has been properly installed and that the pedal retention adjustment has been adjusted to your riding style. It is very important that you are familiar with the proper operation of the engagement and release mechanism of this pedal.
If you are unsure about any of the installation instructions or how to operate this pedal system, we strongly suggest that you contact your local bicycle retailer for assistance.
Keep the shoe cleat and the pedal binding clear of dirt and debris which could affect the function of the system.
Assemble the bolts into the cleat washers and fit the indentations on the cleat, this entire assembly sets into the cleat hole on the sole of the shoe. Adjust the cleat position to your requirements and then tighten fully to the recommended Torque settings.
To engage the shoe/cleat into the pedal, point the toe of your foot slightly down and slide the cleat onto the center of the pedal. As soon as you feel the front of the cleat catch the pedal clip, step down firmly and you will hear a solid 'CLICK' which means the the shoe/cleat is firmly engaged. You should be able to pull up firmly without your foot leaving the pedal. If it is difficult to step down, adjust your pedal retention system to decrease the force required to engage the pedal system.
Twist you heel outward until the cleat disengages from the pedal. If this is difficult, adjust your pedal retention system to decrease the force required to engage the pedal system.